Scaling Batch Enable - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

scaling batch enable

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
scaling batch enable
To enable scalability in the Cisco SME configuration, use the scaling batch enable command. To disable
this feature, use the no form of the command.
Syntax Description This command has no arguments or keywords.
Command Default
None.
Command Modes
Cisco SME cluster onfiguration submode.
Command History Release
NX-OS 4.1(3)
None.
Examples
The following example shows how to enable Cisco SME scalability:
switch# config t
switch(config)# sme cluster c1
switch(config-sme-cl)# scaling batch enable
switch(config-sme-cl)#
Related Commands Command
ssm enable feature
show santap module
Cisco MDS 9000 Family Command Reference
21-6
scaling batch enable
no scaling batch enable
Modification
This command was introduced.
Description
Enables the SANTap feature on the SSM.
Displays the configuration and statistics of the SANTap feature.
Chapter 21 S Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x