Port-Monitor Activate - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 18 P Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

port-monitor activate

To activate the specified port monitor policy, use port-monitor activate command. To deactivate the
policy, use the no form of the command.
Syntax Description name
Defaults
None.
Command Modes Configuration mode.
Command History Release
4.1(1b)
Usage Guidelines
If no name is given, the port-monitor activates the default policy. Presently one policy is activated on one
port type. Two policies can be active but on different port-types. If the specified policy is not active, it
is a redundant operation.
Examples
The following example shows how to activate the port monitor default policy:
switch(config)# port-monitor activate
switch(config)#
The following example shows how to activate the port monitor cisco policy:
switch(config)# port-monitor activate Cisco
switch(config)#
Related Commands Command
show port-monitor
OL-18089-01, Cisco MDS NX-OS Release 4.x
port-monitor activate [name]
no port-monitor activate [name]
Name of RMON port policy.
Modification
This command was introduced.
Description
Displays all port monitor policies.
Cisco MDS 9000 Family Command Reference
port-monitor activate
18-17