C H A P T E; Conditional Debug And Radioactive Tracing; Introduction To Conditional Debugging - Cisco Catalyst 9500 Manual

Conditional Debug and Radioactive Tracing

•
•
•
•
•
•
•
•
•
Topic 1
Topic 2
Topic 2.1

Introduction to Conditional Debugging

The Conditional Debugging feature allows you to selectively enable debugging and logging for specific
features based on the set of conditions you define. This feature is useful in systems where a large number of
features are supported.
Note
The Conditional debug allows granular debugging in a network that is operating at a large scale with a large
number of features. It allows you to observe detailed debugs for granular instances within the system. This
is very useful when we need to debug only a particular session among thousands of sessions. It is also possible
to specify multiple conditions.
Topic 1, on page 303
Topic 2, on page 303
Introduction to Conditional Debugging, on page 303
Introduction to Radioactive Tracing, on page 304
How to Configure Conditional Debug and Radioactive Tracing, on page 304
Monitoring Conditional Debugging, on page 308
Configuration Examples for Conditional Debugging, on page 308
Additional References for Conditional Debugging and Radioactive Tracing, on page 309
Feature History for Conditional Debugging and Radioactive Tracing, on page 309
Only Control Plane Tracing is supported.
System Management Configuration Guide, Cisco IOS XE Amsterdam 17.2.x (Catalyst 9500 Switches)
17
C H A P T E R
303