Debug Fcfwd - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 6 Debug Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

debug fcfwd

To enable debugging for the Fibre Channel forwarding feature, use the debug fcfwd command in EXEC
mode. To disable a debug command, use the no form of the command or use the no debug all command
to turn off all debugging.
Syntax Description
flogimap
idxmap
pcmap
sfib
spanmap
error
event
trace
module slot
vsan vsan-id
Defaults Disabled.
Command Modes EXEC mode.
Command History Release
1.0(2)
Usage Guidelines
None.
Examples The following example displays the system output when the debug fcfwd error command is issued:
switch# debug fcfwd error
Related Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x
debug fcfwd {flogimap | idxmap | pcmap | sfib | spanmap} {error | event | trace} [module slot |
vsan vsan-id [module slot]]
no debug fcfwd {flogimap | idxmap | pcmap | sfib | spanmap} {error | event | trace} [module
slot | vsan vsan-id [module slot]]
Modification
This command was introduced.
Enables flogimap debugging.
Enables idxmap debugging.
Enables pcmap debugging.
Enables sfib debugging.
Enables spanmap debugging.
Enables debugging for FCC error conditions.
Enables debugging for FCC events.
Enables debugging for FCC traces.
(Optional) Specifies the slot number of the module being debugged.
(Optional) Restricts debugging to the specified VSAN.
Cisco MDS 9000 Family Command Reference
debug fcfwd
6-41