Port-Security Distribute - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 18 P Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

port-security distribute

To enable Cisco Fabric Services (CFS) distribution for port security, use the port-security distribute
command. To disable this feature, use the no form of the command.
Syntax Description This command has no other arguments or keywords.
Defaults
Disabled.
Command Modes
Configuration mode.
Command History Release
1.0(2)
Usage Guidelines Before distributing the Fibre Channel timer changes to the fabric, the temporary changes to the
configuration must be committed to the active configuration using the port-security commit command.
Examples The following example shows how to distribute the port security configuration to the fabric.
switch# config terminal
switch(config)# port-security distribute
Related Commands Command
port-security commit
show port-security
OL-18089-01, Cisco MDS NX-OS Release 4.x
port-security distribute
no port-security distribute
Modification
This command was introduced.
Description
Commits the port security configuration changes to the active configuration.
Displays port security information.
Cisco MDS 9000 Family Command Reference
port-security distribute
18-27