Table of Contents
Advertisement
Chapter 3
Operations
Viewing Configurations: Example
This example shows how to view the running configuration.
SCE#show running-config
#This is a general configuration file (running-config).
#Created on 15:50:56
#cli-type 1
#version 1
clock timezone CET 1
snmp-server community "public" ro
snmp-server host 10.1.1.253 traps version 1 "public"
interface LineCard 0
connection-mode active
no silent
no shutdown
flow-aging default-timeout UDP 60
interface FastEthernet 0/0
ip address 10.1.5.109 255.255.0.0
interface FastEthernet 0/1
interface FastEthernet 0/2
exit
line vty 0 4
no timeout
exit
sce#
Removing the Configuration
You can completely remove all current configuration by removing all configuration files. The following
data is deleted by this command:
•
•
•
•
The following data is not deleted by this command:
•
After using this command, the SCE platform should be reloaded immediately to ensure that it returns to
Note
the 'factory default' state.
At the SCE(config)# prompt, type erase startup-config-all and press Enter.
Step 1
All configuration files are removed, including configuration files not explicitly managed by the user, as
listed above.
OL-7827-12
CET
General configuration files
Application configuration files
Static party DB files
Management agent installed MBeans
Network configuration (IP address and default gateway configuration)
MON
December
11
2006
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
Managing Configurations
3-3
Advertisement
Table of Contents
