Cisco SCE2020-4XGBE-SM Configuration Manual page 18

Contents
Configuring Attack Detectors
Configuring Subscriber Notifications
Preventing and Forcing Attack Detection
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
xvi
Specific Attack Filtering
11-2
Attack Detection
11-3
Attack Detection Thresholds
Attack Handling
11-5
Subscriber Notification
Hardware Filtering
11-6
How to Enable Specific-IP Detection
Options
11-9
How to Enable Specific-IP Detection
How to Enable Specific-IP Detection for the TCP Protocol Only for all Attack Directions
How to Enable Specific-IP Detection for the TCP Protocol for Port-based Detections Only for
Dual-sided Attacks
11-10
How to Disable Specific-IP Detection for Protocols Other than TCP, UDP, and ICMP for all Attack
Directions
11-10
How to Disable Specific-IP Detection for ICMP for Single-sided Attacks Defined by the Source
IP
11-10
How to Configure the Default Attack Detector
Options
11-11
How to Define the Default Action and Optionally the Default Thresholds
How to Reinstate the System Defaults for a Selected Set of Attack Types
How to Reinstate the System Defaults for All Attack Types
Specific Attack Detectors
Options
11-13
How to Enable a Specific Attack Detector and Assign it an ACL
How to Define the Action and Optionally the Thresholds for a Specific Attack Detector
How to Define the Subscriber Notification Setting for a Specific Attack Detector
How to Define the SNMP Trap Setting for a Specific Attack Detector
How to Define the List of Destination Ports for TCP or UDP Protocols for a Specific Attack
Detector
11-15
How to Delete User-Defined Values
How to Disable a Specific Attack Detector
How to Disable All Non-default Attack Detectors
How to Disable All Attack Detectors
Sample Attack Detector Configuration
How to Configure the Subscriber Notification Port
Options
11-18
How to Remove the Subscriber Notification Port
11-4
11-5
11-7
11-9
11-9
11-10
11-13
11-16
11-16
11-16
11-17
11-18
11-18
11-18
11-19
11-11
11-12
11-12
11-14
11-15
11-16
11-9
11-14
11-15
OL-7827-12