Table of Contents
Advertisement
Appendix B
Proprietary MIB Reference
The pcubeModules subtree
The pcubeModules subtree provides a root object identifier under which MIB modules can be defined.
This subtree does not contain online data, just global definitions.
The pcubeMgmt subtree
The pcubeMgmt subtree is the root for pcube MIBs that are relevant to multiple products.
The pcubeWorkgroups subtree
The pcubeWorkgroups subtree contains the actual MIBs for Cisco Service Control devices and
sub-devices. This is where the SCE platform, the dispatcher, and also the SCA BB application, hook their
actual OIDs and notifications. This means that the branches in this subtree are defined in multiple MIB
files.
The pcubeConfigCopyMib subtree
The pcubeConfigCopy MIB is a subset of the Cisco Config-Copy-MIB ported to the pcube enterprise
subtree. It supports only local copying of running config to startup config.
The pcubeConfigCopyMIB is defined the MIB file: PCUBE-CONFIG-COPY-MIB.my
The config copy MIB is intended for use by all pcube products, and is therefore placed under the
pcubeMgmt subtree.
The pcubeSE MIB
The pcubeSE MIB comprises two branches:
pcubeSeEvents
pcubeSEObjs
Application MIB Integration
The pcubeSeMIB described above contains information about the SCE platform. Information regarding
the SML application running on the SCE platform is available through the following two interfaces:
•
•
OL-7827-12
application and subscriber groups of the pcubeSeMIB
pcubeEngageMIB
Contains the OIDs used for sending
enterprise-specific notifications.
Contains the OIDs that belong to the SCE
platform, divided into groups according to
functionality.
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
pcube Enterprise MIB
B-3
Advertisement
Table of Contents
