Table of Contents
Advertisement
Chapter 9
Managing Subscribers
How to Enable Aging for Introduced Subscribers
Introduced subscriber aging is not supported when using VPN-based subscribers
Note
From the SCE(config if)# prompt, type
Step 1
How to Disable Aging for Anonymous Group Subscribers
From the SCE(config if)# prompt, type
Step 1
How to Disable Aging for Introduced Subscribers
From the SCE(config if)# prompt, type
Step 1
How to Set the Aging Timeout Period for Anonymous Group Subscribers
Options
The following option is available:
•
From the SCE(config if)# prompt, type
Step 1
Enter.
OL-7827-12
aging-time — the time interval, in minutes, after which an inactive subscriber sill be aged.
subscriber aging introduced
no subscriber aging anonymous
no subscriber aging introduced
no subscriber aging anonymous timeout
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
Configuring Subscriber Aging
and press Enter.
and press Enter.
and press Enter.
aging-time and press
9-39
Advertisement
Table of Contents
