Table of Contents
Advertisement
Displaying the SCE Platform Inventory
Application file: /tffs0/temp.sli
Application name:
Application help:
Original source file: H:\work\Emb\jrt\V2.5\sml\actions\drop\drop_basic_anyflow.san
Compilation date: Wed, November 12 2006 at 21:25:21
Compiler version: SANc v2.50 Build 32 gcc_codelets=true built on: Tue September 23 2006
09:51:57 AM.;SME plugin v1.1
Default capacity option used.
Logger status: Enabled
Platform: SCE 2000 - 4xGBE
Management agent interface version: SCE Agent 3.0.5 Build 18
Software package file: ftp://vk:vk@10.1.8.22/P:/EMB/LatestVersion/3.0.5/se1000.pkg
SCE 2000 uptime is 21 minutes, 37 seconds
SCE>
Displaying the SCE Platform Inventory
Unique Device Identification (UDI) is a Cisco baseline feature that is supported by all Cisco platforms.
This feature allows network administrators to remotely manage the assets in their network by tracing
specific devices through either CLI or SNMP. The user can display inventory information for a remote
device via either:
•
•
The show inventory CLI command displays the following information:
•
•
•
•
•
From the SCE> prompt, type show inventory and press Enter
Step 1
Displaying the SCE Platform Inventory: Example
This example shows how to display the inventory (UDI) of the SCE platform.
SCE>show inventory
NAME: "Chassis",
DESCR: "Cisco SCE 2020 Service Control Engine, Multi Mode, 4-port GE"
PID: SCE2020-4XGBE-MM , VID: V01, SN: CAT093604K3
SCE>
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
3-14
Entity MIB (see
ENTITY-MIB, page
CLI show inventory command
Device name
Description
Product identifier
Version identifier
Serial number
5-38)
Chapter 3
Operations
OL-7827-12
Advertisement
Table of Contents
