Table of Contents
Advertisement
Chapter 14
Managing the SCMP
Assigning the SCMP Peer Device to an Anonymous Group
This command defines the specified anonymous group to be the IP range of the SCMP peer device. You
must define the specified SCMP peer device before assigning the anonymous group.
Options
The following options are available:
•
•
•
•
From the SCE(config if)# prompt, type subscriber anonymous-group name
Step 1
range
How to Remove an Anonymous Group from the SCMP Peer Device
This command defines the specified anonymous group to be the IP range of the SCMP peer device. You
must define the specified SCMP peer device before assigning the anonymous group.
From the SCE(config if)# prompt, type no subscriber anonymous-group name
Step 1
Enter.
Deleting Subscribers Managed by an SCMP Peer Device
Use this command to clear all the subscribers that are managed by a specified SCMP peer device.
Options
The following options are available:
•
From the SCE(config if)# prompt, type no subscriber scmp name
Step 1
Enter.
OL-7827-12
group-name — Name of the anonymous subscriber group to be associated with the specified SCMP
peer device.
range (optional) — IP range defined for the anonymous group
template (optional) — group template assigned to the anonymous group
peer-device-name — User-assigned name of the SCMP peer device
[template
] scmp name
template
peer_device_name — User-assigned name of the SCMP peer device
and press Enter.
peer-device-name
peer-device-name
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
Configuring the SCMP
IP-range
group-name
and press
group-name
all and press
14-13
Advertisement
Table of Contents
