pcubeWorkgroup (1.3.6.1.4.1.5655.4)
pportEntry (1.3.6.1.4.1.5655.4.1.10.1.1)
Entry containing information for a specified port on a module.
Access
Index
{pportModuleIndex, pportIndex}
Syntax
SEQUENCE {pportModuleIndex pportIndex pportType pportNumTxQueues pportIfIndex
pportAdminSpeed pportAdminDuplex pportOperDuplex pportLinkIndex pportOperStatus }
pportModuleIndex (1.3.6.1.4.1.5655.4.1.10.1.1.1)
An index value ( pmoduleIndex ) that uniquely identifies the module where the port is located.
Access
Syntax
INTEGER
pportIndex (1.3.6.1.4.1.5655.4.1.10.1.1.2)
An index value that uniquely identifies the port within the specified module. The value is determined by
the location of the port on the module.
Valid entries are 1 to the value of pmoduleNumPorts for this module.
Access
Syntax
INTEGER
pportType (1.3.6.1.4.1.5655.4.1.10.1.1.3)
The type of physical layer medium dependent interface on the port.
Access
Syntax
INTEGER {1
(e1000BaseSX) — Short Wave fiber Giga Ethernet
}
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
B-74
(1..255)
(1..255)
(other) — none of the following11
Appendix B
not-accessible
RO
RO
RO
(e100BaseTX) — UTP Fast Ethernet (Cat 5)28
Proprietary MIB Reference
OL-7827-12