Table of Contents
Advertisement
The Setup Command
Table 4-1
Parameter
admin password
.root password
password encryption status
Time Settings
time zone name and offset
local time and date
SNTP Configuration
broadcast client status
unicast query interval
unicast server IP address
DNS Configuration
DNS lookup status
default domain name
IP address
RDR Formatter Destination Configuration
IP address
TCP port number
Access Control Lists
Access Control List number
list entries (maximum 20 per list) IP address, and whether permitted or denied access.
IP access ACL
telnet ACL
SNMP Configuration
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
4-2
Setup Command Parameters (continued)
Definition
Admin level password
Character string from 4-100 characters beginning with an alpha
character.
Root level password.
Character string from 4-100 characters beginning with an alpha
character.
Enable or disable password encryption?
Standard time zone abbreviation and minutes offset from UTC.
Current local time and date. Use the format:
00:00:00 1 January 2007
Sets the status of the SNTP broadcast client.
If enabled, the SCE will synchronize its local time with updates
received from SNTP broadcast servers.
Interval in seconds between unicast requests for update (64 – 1024)
IP address of the SNTP unicast server.
Enable or disable IP DNS-based hostname translation.
Default domain name to be used for completing unqualified host
names
IP address of domain name server. (maximum of three servers)
IP address of the RDR-formatter destination
TCP port number of the RDR-formatter destination
How many ACLs will be necessary? What IP addresses will be
permitted/denied access for each management interface? You may
want ACLs for the following:
•
Any IP access
Telnet access
•
SNMP GET access
•
SNMP SET access
•
ID number of the ACL controlling IP access.
ID number of the ACL controlling telnet access.
Chapter 4
Utilities
OL-7827-12
Advertisement
Table of Contents
