Chapter 3
Operations
How to Display the Current Operational Status of the SCE Platform
From the SCE> prompt, type show system operation-status and press Enter
Step 1
Displaying the Current Operational Status of the SCE Platform: Example
This example shows how to display the current operational status of the SCE platform.
SCE>show system operation-status
System Operation status is Operational
Displaying the SCE Platform Version Information
Use this command to display global static information on the SCE platform, such as software and
hardware version, image build time, system uptime, last open packages names and information on the
SLI application assigned.
Step 1
From the SCE> prompt, type show version and press Enter
Displaying the SCE Platform Version Information: Example
This example shows how to display the SCE platform version information.
SCE>show version
System version: Version 3.0.0 Build 240
Build time: Jan 11 2006, 07:34:47
Software version is: Version 2.5.2 Build 240
Hardware information is:
rx
dp
tx
ff
cls
cpld
Lic
rev
Bootrom
L2 cache
lic type
optic mode
Product S/N
Product ID
Version ID
Deviation
Part number
Revision
Software revision : G001
LineCard S/N
Power Supply type : AC
SML Application information is:
OL-7827-12
: 0x0075
: 0x1808
: 0x1708
: 0x0077
: 0x1721
: 0x0025
: 0x0176
: G001
: 2.1.0
: Samsung 0.5
: MFE
: MM
: CAT093604K3
: SCE2020-4XGBE-MM
: V01
:
: 800-26601-01
: B0
: CAT09370L1Q
Displaying the SCE Platform Version Information
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
3-13