Table of Contents
Advertisement
Managing MPLS/VPN Support
Monitoring Subscriber Counters
Use the following Viewer command to display subscriber counters, including those related to
MPLS/VPN mappings.
•
•
About Subscriber Counters
When MPLS/VPN-based subscribers are enabled, the following related counters appear in addition to
the basic subscriber counters:
•
•
•
•
From the SCE> prompt, type show interface linecard 0 subscriber db counters and press Enter.
Step 1
Monitoring Subscriber Counters: Example
SCE>show interface linecard 0 subscriber db counters
Current values:
===============
Subscribers: 2 used out of 99999 max.
Introduced subscribers: 2.
Anonymous subscribers: 0.
Subscribers with mappings: 2 used out of 99999 max.
SINGLE non-VPN IP mappings: 1.
non-VPN IP Range mappings: 1.
IP Range over VPN mappings: 1.
Single IP over VPN mappings: 3.
MPLS-based subscribers are enabled.
MPLS/VPN mappings: 2 used out of 57344 max.
MPLS based VPNs with subscriber mappings: 2 used out of 2015 max.
Subscribers with open sessions: 0.
Subscribers with TIR mappings: 0.
Sessions mapped to the default subscriber: 0.
Peak values:
============
Peak number of subscribers with mappings: 2
Peak number occurred at: 14:56:55 ISR MON June 9 2007
Peak number cleared at: 15:29:39 ISR MON June 9 2007
Event counters:
===============
Subscriber introduced: 2.
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
13-22
About Subscriber Counters, page 13-22
Monitoring Subscriber Counters: Example, page 13-22
MPLS/VPN-based subscribers:
Current number of MPLS/-based subscribers that have VPN mappings.
–
Maximum number of MPLS/VPN-based subscribers
–
MPLS/VPN-based subscribers are also counted in the general subscribers counters, but the general
subscribers maximum number does not apply to MPLS/VPN-based subscribers, which have a
smaller maximum number.
MPLS/VPN mappings:
Current number of used MPLS/VPN mappings
–
Maximum number of MPLS/VPN mappings
–
Note that these values reflect the total number of mappings, not just the mappings used by
MPLS/VPN-based subscribers. Bypassed VPNs also consume MPLS/VPN mappings.
Chapter 13
MPLS/VPN Support
OL-7827-12
Advertisement
Table of Contents
