Table of Contents
Advertisement
Chapter 5
Configuring the Management Interface and Security
key-string — encryption key that the server and client will use when communicating with each
•
other. Make sure that the specified key is actually configured on the TACACS+ server host.
–
From the SCE(config)# prompt, type TACACS-server host host-name
Step 1
timeout-interval
How to Remove a TACACS+ Server Host
Options
The following options are available:
•
host-name — name of the server to be deleted
From the SCE(config)# prompt, type no TACACS-server host host-name and press Enter.
Step 1
How to Configure the Global Default Key
Use this command to define the global default key for the TACACS+ server hosts. This default key can
be overridden for a specific TACACS+ server host by explicitly configuring a different key for that
TACACS+ server host.
Options, page 5-17
•
How to Define a Global Default Key, page 5-17
•
How to Clear the Global Default Key, page 5-18
•
Options
The following options are available:
•
key-string — default encryption key that all TACACS+ servers and clients will use when
communicating with each other. Make sure that the specified key is actually configured on the
TACACS+ server hosts.
–
How to Define a Global Default Key
From the SCE(config)# prompt, type TACACS-server key key-string and press Enter.
Step 1
OL-7827-12
Default = no key or user-configured global default key (see
page
5-17.)
key key-string
] [
]
Default = no encryption
and press Enter.
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
Configuring the Available Interfaces
How to Define a Global Default Key,
port portnumber
[
] [
timeout
5-17
Advertisement
Table of Contents
