Table of Contents
Advertisement
Chapter 8
Raw Data Formatting: The RDR Formatter and NetFlow Exporting
Disabling the Linecard from Sending RDRs
The silent command disables the linecard from issuing data records. Both RDRs and NetFlow export
packets are suppressed.
Use the no form of this command if you want the linecard to send records.
How to Disable the Linecard from Sending RDRs
From the SCE(config if)# prompt, type silent and press Enter.
Step 1
Stops the linecard from producing RDRs.
How to Enable the Linecard to Send RDRs
From the SCE(config if)# prompt, type no silent and press Enter.
Step 1
OL-7827-12
Disabling the Linecard from Sending RDRs
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
8-19
Advertisement
Table of Contents
