How To Configure Vas Server Group Failure Parameters - Cisco SCE2020-4XGBE-SM Configuration Manual

Software configuration guide
Table of Contents

Advertisement

Configuring VAS Traffic Forwarding
How to Add a VAS Server to a Specified VAS Server Group
Step 1
From the SCE(config if)# prompt, type VAS-traffic-forwarding VAS server-group group-number
server-id id-number and press Enter.
How to Remove a VAS Server from a Specified VAS Server Group
From the SCE(config if)# prompt, type no VAS-traffic-forwarding VAS server-group group-number
Step 1
server-id id-number and press Enter.
How to Remove all VAS Servers from a Specified VAS Server Group
Use this command to remove all VAS servers from a specified VAS server group and set all group
parameters to their default value.
From the SCE(config if)# prompt, type no VAS-traffic-forwarding VAS server-group group-number
Step 1
and press Enter.

How to Configure VAS Server Group Failure Parameters

About VAS Server Group Failure Parameters
Use the following commands to configure these failure parameters for the specified VAS server group:
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
12-26
About VAS Server Group Failure Parameters, page 12-26
Options, page 12-27
How to Configure the Minimum Number of Active Servers for a Specified VAS Server Group,
page 12-27
How to Reset the Minimum Number of Active Servers for a Specified VAS Server Group to the
Default, page 12-27
How to Configure the Failure Action for a Specified VAS Server Group, page 12-27
How to Configure the Failure Action for a Specified VAS Server Group to the Default, page 12-27
Minimum number of active servers — If the number of active servers in the server group goes below
this number, the group will be in Failure state
Failure action — The action to be applied to all new flows mapped to this server group while it is
Failure state:
Block — all new flows assigned to the failed VAS server group will be blocked by the SCE
platform.
Pass — all new flows assigned to the failed VAS server group will be considered as regular
non-VAS flows, and will be processed without VAS service.
Chapter 12
Value Added Services (VAS) Traffic Forwarding
OL-7827-12

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sce 2000Sce 1000

Table of Contents