Table of Contents
Advertisement
Monitoring Subscribers
How to display subscribers that are mapped to a specified IP address, or range of IP addresses
Options
The following options are available:
ip-range — IP address (x.x.x.x) or range of IP addresses (x.x.x.x/y) to match
•
vpn-name (optional) — The name of the VPN in which to search for the IP address
•
From the SCE> prompt, type
Step 1
vpn-name ]
How to display subscribers that are mapped to IP addresses that are included in a given IP address or IP range
Options
The following options are available:
ip-range — IP address (x.x.x.x) or range of IP addresses (x.x.x.x/y) to match
•
vpn-name (optional) — The name of the VPN in which to search for the IP address
•
From the SCE> prompt, type
Step 1
ip-range
How to display subscribers that are mapped to a specified VLAN ID
Options
The following options are available:
•
VLAN-id — VLAN ID to match
From the SCE> prompt, type
Step 1
and press Enter.
How to display subscribers that are mapped to a specified MPLS/VPN
Options
The following options are available:
pe-id — loopback IP address of the relevant PE router
•
bgp-label — label of the relevant BGP LEG
•
Step 1
From the SCE> prompt, type
bgp-label
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
9-22
show interface linecard 0 subscriber mapping IP
and press Enter.
show interface linecard 0 subscriber mapping included-in IP
and press Enter.
[VPN vpn-name ]
show interface linecard 0 subscriber mapping VLAN-id
show interface linecard 0 subscriber mapping MPLS-VPN PE-ID
BGP-label and press Enter.
Chapter 9
Managing Subscribers
ip-range
[VPN
VLAN-id
pe-id
OL-7827-12
Advertisement
Table of Contents
