Appendix B Proprietary Mib Reference; Pcube Enterprise Mib - Cisco SCE2020-4XGBE-SM Configuration Manual

pcube Enterprise MIB

pcube Enterprise MIB
The pcube Enterprise MIB splits into four main groups:
•
•
•
•
The pcube enterprise tree structure is defined in a MIB file named PCUBE-SMI.my.
Note The following object identifier represents the pcube Enterprise MIB:
1.3.6.1.4.1.5655, or iso.org.dod.internet.private.enterprise.pcube.
Figure B-1
Conventions used in the diagram:
•
•
Figure B-1
se100
pcubeProductsMIB
The pcubeProducts subtree
The pcubeProducts subtree contains the OIDs of Cisco Service Control products. These OIDs are used
only to describe the Cisco Service Control platforms, not as roots for other OIDs.
This subtree does not contain online data, just global definitions.
The pcubeProductsMIB is defined the MIB file: PCUBE-PRODUCTS-MIB.my
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
B-2
• Products
• Modules
• Management
• Workgroup
illustrates the pcube Service Control Enterprise MIB structure.
Dotted arrows surrounding a unit or units indicate that the component is described in the MIB file
specified below the line.
A shadowed box indicates that the component is described in its own MIB file.
Cisco Service Control MIB Structure
pcubeProducts
1
se1000 se2000
1 2 3
pcubeSeMIB
2 3
pcubeSeConformance
1
pcubeSeGroups
1
Pcube
5655
pcubeModules pcubeMgmt
2
pcubeConfigCopyMIB
pcubeEngageMIB
4
pcubeEngageConformance
1
pcubeEngageGroups
1
Appendix B Proprietary MIB Reference
pcubeWorkgroups
3 4
1
pcubeSeEvents pcubeSEObjs
0 1
pcubeSeMIB (Pcube SCEMIB)
pcubeEngageObjs
2
pcubeEngageMIB
(CISCO-SCAS-BB MIB)
OL-7827-12