Table of Contents
Advertisement
Chapter 5
Configuring the Management Interface and Security
entityPhysical group
The entityPhysical group describes the physical entities managed by a single agent. It contains a single
table, the entPhysicalTable, that identifies physical system components.
These are the details of specific objects in the entPhysicalTable, as implemented in SCOS:
entPhysicalIndex (1)
entPhysicalDescr (2)
entPhysicalVendorType (3)
entPhysicalContainedIn (4)
entPhysicalClass (5)
entPhysicalParentRelPos (6)
entPhysicalName (7)
entPhysicalHardwareRev (8)
entPhysicalFirmwareRev (9)
entPhysicalSoftwareRev (10)
entPhysicalSerialNum (11)
entPhysicalMfgName (12)
entPhysicalModelName (13)
entPhysicalAlias (14)
entPhysicalAssetID (15)
entPhysicalIsFRU (16)
entityGeneral group
The entityGeneral group contains general information relating to the other object groups. The
entGeneral group contains a single scalar object.
These are the details of specific object in the entityGeneral group, as implemented in SCOS:
entLastChangeTime
Information About pcube Enterprise MIB
•
pcube Enterprise MIB, page 5-40
Loading the MIB Files, page 5-41
•
OL-7827-12
1 (SCE main board)
The description corresponding to the Product ID, as it appears in the
product catalog.
cevChassisSCE2000 = {cevChassis 511}
(1.3.6.1.4.1.9.12.3.1.3.511)
cevChassisSCE1000 = {cevChassis 512}
(1.3.6.1.4.1.9.12.3.1.3.512)
0 (not contained)
3 (chassis)
1
"Chassis"
Version ID, as identified in EPROM
empty string
Software version, as seen in "show version"
Serial number, as identified in EPROM
"Cisco Systems, inc."
Product ID, as identified in EPROM
empty string
empty string
2 (false)
sysUpTime. This reflects the fact that the entries in the Entity-MIB
do not change in the SCE platform after their creation at boot time.
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
Configuring and Managing the SNMP Interface
5-39
Advertisement
Table of Contents
