Cisco SCE2020-4XGBE-SM Configuration Manual page 54

Authorization and Command Levels (Hierarchy)
Table 2-5
Table 2-5
Authorization Level or
Command Mode
User Exec
Viewer
Privileged Exec
Global Configuration
Management Interface
Configuration
(management)
Linecard Interface
Configuration
GigabitEthernet Interface
Configuration (traffic)
Line Configuration
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
2-8
summarizes how to navigate the CLI command hierarchy.
CLI Command Hierarchy
Use this command to access
Not applicable
enable 5
enable 10 or enable 15 (accesses root level)
configure
interface Mng 0/1 or 0/2
interface linecard 0
SCE 2000: interface gigabitethernet 0/1, 0/2,
0/3, or 0/4
SCE 1000: interface gigabitethernet 0/1 or
0/2
OR
SCE 2000: interface range gigabitethernet
0/<port-range (any range between 1 and 4)
SCE 1000: interface range gigabitethernet
0/1-2
line vty 0
Chapter 2 Command Line Interface
Use this command to
exit
logout or exit (exits the
current CLI session)
disable
disable
exit (exits to Privileged
Exec)
end (exits to User Exec)
exit (exits to Global
Configuration)
end (exits to User Exec)
exit (exits to Global
Configuration)
end (exits to User Exec)
exit (exits to Global
Configuration)
end (exits to User Exec)
exit (exits to Global
Configuration)
end (exits to User Exec)
OL-7827-12