Clearing The Subscriber Database Counters; Displaying Subscribers - Cisco SCE2020-4XGBE-SM Configuration Manual

Software configuration guide
Table of Contents

Advertisement

Monitoring Subscribers
============
Peak number of subscribers with mappings: 2
Peak number occurred at: 14:56:55 ISR MON June 9 2007
Peak number cleared at: 15:29:39 ISR MON June 9 2007
Event counters:
===============
Subscriber introduced: 2.
Subscriber pulled: 0.
Subscriber aged: 0.
Pull-request notifications sent: 0.
State notifications sent: 0.
Logout notifications sent: 0.
Subscriber mapping TIR contradictions: 0

Clearing the Subscriber Database Counters

From the SCE# prompt, type
Step 1
Clears the total and maximum counters.

Displaying Subscribers

You can display the names of all subscribers.
You can also display specific subscriber name(s) that meet various criteria:
Use the following commands to display subscribers:
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
9-18
clear interface linecard 0 subscriber db counters
Displaying Subscribers: All Current Subscriber Names, page 9-19
Displaying Subscribers: By Subscriber Property or Prefix, page 9-19
Displaying Subscribers: By Mapping (IP Address, VPN, VLAN ID, or MPLS/VPN), page 9-21
A subscriber property is equal to, larger than, or smaller than a specified value.
Subscriber name matches a specific prefix or suffix.
Mapped to a specified IP address range (may be within a specified VPN).
Mapped to a specified VLAN ID.
Mapped to a specified MPLS/VPN.
show interface linecard 0 subscriber all-names
show interface linecard 0 subscriber [amount] [prefix 'prefix'] [property 'propertyname'
equals|greater-than|less-than 'property-val']
show interface linecard 0 subscriber [amount] prefix 'prefix'
show interface linecard 0 subscriber [amount] suffix 'suffix'
show interface linecard 0 subscriber mapping IP 'iprange' [VPN 'vpn-name']
show interface linecard 0 subscriber [amount] mapping intersecting IP 'iprange' [VPN 'vpn-name']
show interface linecard 0 subscriber mapping VLAN-id 'VLAN-id'
show interface linecard 0 subscriber mapping MPLS-VPN PE-ID 'pe-id' BGP-label 'bgp-label'
Chapter 9
Managing Subscribers
and press Enter.
OL-7827-12

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sce 2000Sce 1000

Table of Contents