Rdrformatterreportratepeaktime (1.3.6.1.4.1.5655.4.1.6.8); Rdrformatterprotocol (1.3.6.1.4.1.5655.4.1.6.9); Rdrformatterforwardingmode (1.3.6.1.4.1.5655.4.1.6.10); Rdrformattercategorytable (1.3.6.1.4.1.5655.4.1.6.11) - Cisco SCE2020-4XGBE-SM Configuration Manual

pcubeWorkgroup (1.3.6.1.4.1.5655.4)

rdrFormatterReportRatePeakTime (1.3.6.1.4.1.5655.4.1.6.8)

The time (in hundredths of a second) since the rdrFormatterReportRatePeak value occurred.
Access
Syntax
TimeTicks

rdrFormatterProtocol (1.3.6.1.4.1.5655.4.1.6.9)

The RDR protocol currently in use.
Access
Syntax
INTEGER {1
RDR protocol version 2
}

rdrFormatterForwardingMode (1.3.6.1.4.1.5655.4.1.6.10)

The manner in which the RDR formatter sends the reports to the destinations.
Access
Syntax
INTEGER {1
primary (active) destination, and all other destinations are in standby3
(simpleLoadBalancing) — each successive RDR is sent to a different destination, one
destination after the other, in a round robin manner4
all destinations
}

rdrFormatterCategoryTable (1.3.6.1.4.1.5655.4.1.6.11)

This table describes the different categories of RDRs and supplies some statistical information about the
RDRs sent to these categories
Access
Syntax
Sequence of rdrFormatterCategoryEntry
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
B-48
(other) — none of the following2
(other) — none of the following2
Appendix B
RO
RO
(RDRv1) — RDR protocol version 13
RO
(redundancy) — all RDRs are sent to the
(multicast) — all RDRs are sent to
not-accessible
Proprietary MIB Reference
(RDRv2) —
OL-7827-12