Subscriber Traffic Processor IP Ranges
How to Display Traffic Processor Mappings State
From the SCE> prompt, type
Step 1
press Enter.
How to Display Configuration of a Specified TIR
From the SCE> prompt, type
Step 1
and press Enter.
How to Display Configuration of All TIRs
Step 1
From the SCE> prompt, type
Enter.
How to Display Mappings Related to a Specified TIR
From the SCE> prompt, type
Step 1
TP-IP-range name
How to Display the Number of Subscribers with Mappings Related to a Specified TIR
From the SCE> prompt, type
Step 1
TP-IP-range name
How to Display Complete Subscriber Information
Step 1
From the SCE> prompt, type
Displays complete subscriber information, including which TIR the subscriber belongs to (if applicable).
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
9-36
show interface linecard 0 subscriber TP-mappings statistics
show interface linecard 0 subscriber TP-IP-range name
show interface linecard 0 subscriber TP-IP-range all
show interface linecard 0 subscriber mapping included-in
tir-name and press Enter.
show interface linecard 0 subscriber amount mapping included-in
tir-name and press Enter.
show interface linecard 0 subscriber name
Chapter 9
Managing Subscribers
and
tir-name
and press
name and press Enter.
OL-7827-12