Configuring The Radius Client; Options - Cisco SCE2020-4XGBE-SM Configuration Manual

Chapter 14 Managing the SCMP

Options

The following options are available:
•
•
•
Default = no elements concatenated with the GUID
Disable the SCMP.
Step 1
SCE(config)#no scmp
Define the subscriber ID:
Step 2
SCE(config)#scmp subscriber id append-to-guid radius-attributes Calling-Station-Id |
NAS-Port-Id | User-Name [Calling-Station-Id | NAS-Port-Id | User-Name] [Calling-Station-Id
| NAS-Port-Id | User-Name]
Step 3 Enable the SCMP.
SCE(config)#scmp

Configuring the RADIUS Client

You can configure the following options for the RADIUS client
•
The RADIUS client polls the sockets to receive the next message and calls the SCMP engine to handle
it, based on the type of the received message. Messages that were not acknowledged can be retransmitted
up to the configured maximum number of retries.
OL-7827-12
1st element — any one of the following:
Calling-Station-Id
–
NAS-Port-Id
–
– User-Name
2nd element (optional) — any one of the following (if specified, usually not the option specified as
the first element):
Calling-Station-Id
–
– NAS-Port-Id
– User-Name
3rd element (optional) — any one of the following (if specified, usually the remaining option not
specified as either of the first two elements):
– Calling-Station-Id
– NAS-Port-Id
– User-Name
Define the parameters for retransmitting unacknowledged messages.
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
Configuring the SCMP
14-15