Configuring the SCMP
Adding an SCMP Peer Device
•
•
Adding an SCMP peer device is a two-step process:
1.
2.
How to Define an SCMP Peer Device
Options
The following options are available:
•
•
•
•
•
Defaults:
•
•
From the SCE(config)# prompt, type scmp name
Step 1
shared_secret
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
14-12
How to Define an SCMP Peer Device, page 14-12
Assigning the SCMP Peer Device to an Anonymous Group, page 14-13
Define the device, configuring the following parameters:
device name
–
RADIUS host
–
RADIUS shared secret authorization
–
port number (optional)
–
accounting port number (optional)
–
Associate the device with one or more unmapped anonymous groups.
peer_device_name — User-assigned name of the SCMP peer device
radius_hostname — IP address or host-name of the RADIUS host (if a host-name is used, it must
be valid at time of the configuration)
shared_secret — RADIUS shared secret
auth-portnumber (optional) — authorization port number
acct-portnumber (optional) — accounting port number
auth-port# — 1812
acct-port# — 1813
[auth-port
auth-portnumber
radius
peer_device_name
acct-port
acct-portnumber
Chapter 14
Managing the SCMP
secret
radius_hostname
] and press Enter.
OL-7827-12