Pmoduleattackobjectscleartime (1.3.6.1.4.1.5655.4.1.3.1.1.14); Pmoduleadminstatus (1.3.6.1.4.1.5655.4.1.3.1.1.15); Pmoduleoperstatus (1.3.6.1.4.1.5655.4.1.3.1.1.16); Linktable (1.3.6.1.4.1.5655.4.1.4.1) - Cisco SCE2020-4XGBE-SM Configuration Manual

Appendix B Proprietary MIB Reference

pmoduleAttackObjectsClearTime (1.3.6.1.4.1.5655.4.1.3.1.1.14)

The time (in hundredths of a second) since the attack objects were cleared. Writing a 0 to this object
causes the counters to be cleared.
Access
Syntax
TimeTicks

pmoduleAdminStatus (1.3.6.1.4.1.5655.4.1.3.1.1.15)

Indicates whether the module is configured to handle traffic on startup or reboot (active), to be the hot
standby.
Access
Syntax
INTEGER {1
(secondary) — Fail-over module on startup.
}

pmoduleOperStatus (1.3.6.1.4.1.5655.4.1.3.1.1.16)

Indicates whether the module is currently handling (active), or is on standby.
Access
Syntax
INTEGER {1
(standby) — Currently is the fail-over module.
}

linkTable (1.3.6.1.4.1.5655.4.1.4.1)

A list of link entries containing information regarding the configuration and status of the links that pass
through the SCE platform and carry in-band traffic.
The number of entries is determined by the number of modules in the chassis and the number of links
on each module.
Access
Syntax
Sequence of linkEntry
OL-7827-12
(other) — none of the following2
(other) — none of the following2
RO
RO
(primary) — Handle traffic on startup.3
RO
(active) — Currently is handling traffic.3
not-accessible
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
pcubeWorkgroup (1.3.6.1.4.1.5655.4)
B-39