Chapter 4
Utilities
How to Stop a Flow Capture
From the SCE(config if)# prompt, type flow-capture stop and press Enter.
Step 1
Monitoring the Flow Capture
Use the following command to monitor the flow capture process. It displays the following information:
•
•
•
•
•
How to Monitor the Flow Capture
From the SCE> prompt, type show interface linecard 0 flow-capture and press Enter.
Step 1
OL-7827-12
status of the recording process
current target file size
number of packets captured
number of packets lost
configured values of the different controllers
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
Flow Capture
4-15