Display The Device Manager - Cisco C880 M4 Configuration Manual
With sap hana tailored datacenter integration
Hide thumbs
Also See for C880 M4:
- Service manual (132 pages) ,
- Operating manual (58 pages) ,
- Service supplement manual (27 pages)
Table of Contents
Advertisement
Figure 77.
Note the following points when using UEFI Driver Version 6.11a5 or later to set a SAN boot configuration on the
16-Gbps Fibre Channel card. Refer to Display Adapter Info on the Port 001:Emulex LPe16002B-M6-F 16Gb 2-port
PCIe Fiber Chann screen to check the UEFI driver version.
●
Before deleting a registered boot entry with the Delete Boot Device process, be sure to change the BIOS
setting (Set Boot from SAN) to Disable.
●
Running the Delete Boot Device process with Enable as the BIOS setting (Set Boot from SAN) may
sometimes render the Emulex Configuration Utility inoperable. In such a case, in the Power Control window
of the MMB web user interface, select Reset to restart the system. Then reenter the settings for the 16-
Gbps Fibre Channel card.
Display the Device Manager
Display the Device Manager screen.
1.
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Device Manager Screen
Select Device Manager (Figure 78).
Page 75 of 146
Advertisement
Table of Contents
