Configuring Hdd Advanced Settings; Configuring Main Stream Settings; Configuring Sub Stream Settings; Configuring Snapshot Storage Settings - Honeywell Performance Series User Manual

Performance Series Network Video Recorder User Guide

Configuring HDD Advanced Settings

Configuring Main Stream Settings

Here, you can assign the main stream to a particular HDD group.
1. Go to Main Menu  SETTING  STORAGE  Advanced  Main Stream.
Figure 9-6 Main Stream Storage Configuration Tab
2. You can set the HDD group for all channels or set each channel individually:
• Select a HDD group from the drop-down Set All Channels menu. Click All to apply the
parameter settings to all channels.
• Select an HDD group from the drop-down menu for each channel, as required.
3. Click Apply to save your settings.

Configuring Sub Stream Settings

Configuring the sub stream channel settings is the same as for the main stream (see
Configuring Main Stream Settings

Configuring Snapshot Storage Settings

1. Go to Main Menu  SETTING  STORAGE  Advanced  Snapshot.
110
on page 110).