Devices Connection; Starting And Shutting Down The Nvr; Starting The Nvr; Shutting Down/Reboot The Nvr - Honeywell 30 Series User Manual

30 Series Network Video Recorder User Guide

Devices Connection

The following diagram shows a typical NVR connection:
Figure 2-1 Devices Connection

Starting and Shutting Down the NVR

Starting the NVR

1. Verify that the NVR is connected to an appropriate power source.
2. Turn on the power switch (See No. 11 in

Shutting Down/Reboot the NVR

To prevent damage to the hard drive, follow these steps to shut down the NVR:
1. In live view screen, click
Toolbar).
6
Figure 1-2) on the back panel to start the NVR.
(Main Menu) on the main toolbar (see Figure 3-3 Main