Test Transmission And Function - Honeywell 057810 Manual

56 Mounting and Connection Instructions MB-Secure 4G IP USB / IP USB Extension
LED green (2)
LED green - lit: Supply voltage is present on the
RFW-4000 .
LED yellow (1)
The yellow LED uses a range of different flashing and waiting times to display the current status
of the module on the GSM network:
LED yel- 500ms on / 500ms off: RFW-4000 terminal status
low
LED yel- 10ms on / 4s off:
low
LED yel- 10ms on / 1s off:
low
LED yel- 10ms on / 2s off:
low

6.4.5 Test transmission and function

Initiate sample transmission to the security company (receiving control panel), check that
connection is established.
Diagnostic and test functions (including GSM functions) can be implemented in the IQ Panel-
Control using "Diagnostic Monitor". Further information can be found in the IQ PanelControl
User Manual.
More information about diagnosis and test functions regarding the GSM (e.g. signal
level evaluation) can be found in the IQ PanelControl User Manual
Possible errors / operating states
– No SIM card inserted or
– No PIN recognised
– Network search running
– Authentication/login is in progress.
RFW-4000 terminal is logged into the wireless network.
RFW-4000 terminal establishes a connection to the mobile
network or is logged into the mobile network, a data call
connection to a remote station exists.
RFW-4000 terminal is transmitting data packages over
GPRS, UMTS or LTE radio network.
1 2
Module