Configuring Live View Settings; Live View; Figure 118 Network Packet Capture Interface - Honeywell 35 Series User Manual

Note: If the NVR is plugged with the USB disk, click the network packet capture
and set the relevant parameters of the packet capture. The captured data
can be downloaded and used for device problem analysis.
1. Go to Main Menu > Information > Maintenance > Network Packet
2. Click Network Packet Capture to enter.

Figure 118 Network Packet Capture interface

3. Choose the USB path to save the file.
4. Set the port, IP, number of packets captured. The default settings are
5. Click START to capture. Click STOP to end capturing. You can

Configuring Live View Settings

After you logged in, the system goes to main menu, click Live view. You can
view the monitor video of each channel.
The displayed window amount may vary. The actual product shall prevail.

Live View

On the live view interface, you can view the monitor video of each channel.
The corresponding channel displays date, time, and channel name after
you overlay the corresponding information. Refer to the following table for
detailed information.
Honeywell 35 Series Network Video Recorder User Guide
Capture.
All, you can choose custom to set.
analysis the file.
91