Configuring Ptz Settings - Honeywell 30 Series User Manual

Preset
Patrol

Configuring PTZ Settings

You can configure presets, tours, patterns, and borders using the PTZ control panel.
Configuring PTZ Presets
Go to 
Figure 3-7 PTZ Settings
•
Select a PTZ camera.
•
Use the PTZ panel to move to a field of view where you want to designate as a preset
position.
•
Click , and enter a name for the position. Press Enter to proceed.
•
Repeat the configuration to create more positions.
•
Click Apply for the configuration to take effect.
Note
If you configured preset positions, click this button, a list of
preset positions will appear.
If you configured preset positions into a patrolling tour, click
this button and the camera will proceed with patrolling
through preset points.
 PTZ settings:
The PTZ panel can vary with different PTZ cameras.
Viewing Live Video
17