Recording Video; Manual Recording; Scheduled Recording - Honeywell 30 Series User Manual

30 Series Network Video Recorder User Guide

4 Recording Video

This chapter contains the following sections:
•

Manual Recording

•

Scheduled Recording

Manual Recording
In live view window, select a window and click
recording. The manual recording icon
stop the manual recording.
Scheduled Recording
By default, all video feeds from cameras are recorded at all time with the icon
the window. You can modify the recording task using the schedule tool:
Go to

Figure 4-1 Scheduled Recording
1. Select a camera and click to select a recording condition's checkbox–Continuous
recording, Event recording and Clear (no recording).
2. Click and drag on the cells on the time table. For example, to stop the recording during a
period, select the Clear checkbox and move the cursor across the time table. The
minimum unit on the table is half an hour.
3. You may also use the scheduler tool on the right to facilitate the process.
18
on page 18.
on page 18.
Schedule.
on the camera tool bar to start a manual
will appear on the window. Click again to
appeared on