Top View - Enhanced Dock - Honeywell Thor VM3 Manual

Enhanced Dock
Accessory
Mount
Fuse
Power Switch
Power
Connector
Note: For the VX4D Enhanced DOCK: COM1 is used for screen blanking (via the power cable connector) and is
unavailable when the screen blanking box is attached. When a screen blanking box is attached, any external
serial device such as a scanner, must be connected to the COM2 port on the connection.dock. If a screen
blanking box is not connected via the power cable, the COM1 port on the dock is available for a serial device

Top View - Enhanced Dock

Only the Enhanced Dock has these connectors on the top. The connectors are located behind water tight plugs.
USB Host
2 - 8
Strain Relief
Clamps
Ethernet
RAM
Ball
Accessory
Mount
CANbus
/ Audio
COM2
COM1
USB1