Suzuki Grand Vitara 2011 Manual page 1331

19) Place transmission (1) upright as shown in the
figure.
NOTE
• To prevent transmission case from getting
damaged, protect its contacting surface
with stand by using shop cloth or the like.
• A stand of such size as shown in the figure
will facilitate work.
D
A: 50 mm (1.9 in.)
B: 350 mm (13.8 in.)
C: 400 mm (15.7 in.)
D: 200 mm (7.9 in.)
20) Check top surface level of forward clutch (2) against
case (1) for reassembly.
21) Remove forward clutch.
NOTE
Confirm direction of bearing and bearing
race for reassembly.
2
1
22) Remove direct clutch (1).
1
C
A
B
I5JB0A510079-01
1
2
I5JB0A510080-01
1
I5JB0A510081-01
Automatic Transmission/Transaxle:
23) Remove pawl bracket (1), and then parking lock rod
(2) from manual shift lever.
24) Remove pawl spring (3), pawl pin and parking rock
pawl (4).
4
3
25) Remove 2 bolts (1) from valve body side.
26) Remove center support assembly (1).
27) Remove retaining ring (1), planetary gear assembly
leaf spring, bearing and bearing race.
NOTE
• Use care not to cause damage to case
when removing retaining ring.
• Confirm direction of bearing and bearing
race for reassembly.
5A-106
2
1
I5JB0A510082-01
1
I5JB0A510083-01
IYSQ01510104-01
1
I5JB0A510084-01