7B-83 Air Conditioning System:
Compressor Assembly On-Vehicle Inspection
1) Install manifold gauge set (1) as shown in the figure.
2) Close Hi (4) and Lo (5) side valves.
1
5
3
2. High pressure side (Delivery side hose)
3. Low pressure side (Suction side pipe)
Compressor Assembly and Compressor Bracket Components (F9Q Engine Model)
1. Compressor assembly
2. Compressor bracket
3. Idler pulley No.1
4. Idler pulley No.2
5. Dust cover No.1
6. Dust cover No.2
7. Compressor mount bolt
S6JB0A7206033
4
2
I5JB0A720059-01
3) Run engine at fast idle.
4) Check compressor for the following items.
If any of the checks indicated a defect, repair
compressor.
• High pressure gauge reading is not low and low
pressure gauge reading is not higher than normal.
• Metallic sound
• Leakage from compressor
8. Compressor bracket mount bolt
9. Idler bolt No.1
10. Idler bolt No.2
: 25 N⋅m (2.5 kgf-m, 18.5 lb-ft)
: 40 N⋅m (4.0 kgf-m, 29.0 lb-ft)
: 28 N⋅m (2.8 kgf-m, 20.5 lb-ft)
: 50 N⋅m (5.0 kgf-m, 36.5 lb-ft)
S6JB0A7206048
I5JB0B720017-05