Transmission Shift Control Lever Removal And Installation - Suzuki Grand Vitara 2011 Manual

5B-47 Manual Transmission/Transaxle: For Diesel Engine Model
7) Install oil level/filler plug with new washer, and then
tighten it to specified torque.
Tightening torque
Oil filler plug (b): 35 N·m (3.5 kgf-m, 25.0 lb-ft)
1, (a)
[A]
o
C -30 -20 -10
o
F -22 -4 14
2, (b)
I5JB0B520006-01
I5JB0A520022-02
80W-90
75W-85, 75W-90
0 10 20 30 40
32 50 68 86 104
Temperature
I5JB0A520021-02
Transmission Shift Control Lever Removal and
Installation
Removal
1) Remove front console box referring to "Console Box
Components in Section 9H".
2) Lift up boots cover (1), boot (2) and sheet (3).
3) With gear shift control case cover (4) pushed down
with fingers, turn it to counter clockwise and take out
shift control lever (5).
Installation
1) Tighten new control lever locating bolts (1) to
specified torque, if removed.
Tightening torque
Control lever locating bolt (a): 10 N·m (1.0 kgf-
m, 7.5 lb-ft)
2) Apply grease to pivot portions and seat, then install
shift control lever.
"A": Grease 99000–25010 (SUZUKI Super
Grease A)
S6JB0A5226007
2
1
3
5
4
I5JB0B520111-02
"A"
1, (a)
I5JB0B520112-01