7B-95 Air Conditioning System:
Installation
Reverse removal procedure noting the following.
• Clean installation part of compressor body (3) and
thermal switch (1).
• Apply specified silicon sealant to contact face (2) of
thermal switch (1) and then, install thermal switch to
compressor body (3).
"A": Silicon sealant 99000–34220 (SUZUKI
SILICON SEALANT KE-347W (100g))
Relief Valve On-Vehicle Inspection for M16
Engine Model
Using special tool, check is there is refrigerant leakage.
If there is refrigerant leakage, replace relief valve (1).
Special tool
(A): 09990–86012
(A)
1
2, "A"
3
I5JB0A720081-03
S6JB0A7206044
1
I5JB0D720005-01
Relief Valve On-Vehicle Inspection For J20
Engine Model
Using special tool (A), check is there is refrigerant
leakage.
If there is refrigerant leakage, replace compressor body.
Special tool
(A): 09990–86012
(A)
Relief Valve Removal and Installation for M16
Engine Model
Removal
1) Removal compressor from vehicle. Referring to
"Compressor Assembly Removal and Installation for
M16 Engine Model".
2) Remove relief valve (1) and O-ring from compressor
body (2).
S6JB0A7206045
I5JB0D720006-01
S6JB0A7206046
1
2
I5JB0A720084-01