Diagnostic Information And Procedures; 4Wd Control System Check - Suzuki Grand Vitara 2011 Manual

4WD Control System Check

Refer to the following items for the details of each step.
Step
1 Customer complaint analysis
1) Perform customer complaint analysis.
Was customer complaint analysis performed?
2 DTC / freeze frame data check, record and clearance
1) Check for DTC.
Is there any DTC(s)?
3 Visual inspection
1) Perform visual inspection.
Is there any faulty condition?
4 Visual inspection
1) Perform visual inspection.
Is there any faulty condition?
5 Trouble symptom confirmation
1) Shift transfer to "4H", "4H-lock", "4L-lock" and "N"
positions referring to "4WD Control System Operation
Inspection: Motor-Shift Type (Transfer with Shift
Actuator)".
2) Confirm trouble symptom.
Is trouble symptom identified?
6 Rechecking and record of DTC / freeze frame data
1) Recheck for DTC referring to "DTC Check: Motor-Shift
Type (Transfer with Shift Actuator)".
Is there any DTC(s)?
7 Rechecking and record of DTC / freeze frame data
1) Recheck for DTC referring to "DTC Check: Motor-Shift
Type (Transfer with Shift Actuator)".
Is there any DTC(s)?
8 4WD control symptom diagnosis
1) Check and repair according to "4WD Control Symptom
Diagnosis: Motor-Shift Type (Transfer with Shift
Actuator)".
Are check and repair complete?
9 Troubleshooting for DTC
1) Check and repair according to applicable DTC flow.
Are check and repair complete?
10 Check for intermittent problems
1) Check for intermittent problems.
Is there any faulty condition?
Transfer: Motor-Shift Type (Transfer with Shift Actuator) 3C-16

Diagnostic Information and Procedures

Action Yes
Go to Step 2.
Print DTC or write them
down and clear them by
referring to "DTC
Clearance: Motor-Shift
Type (Transfer with Shift
Actuator)". Go to Step 3.
Repair or replace
malfunction part. Go to
Step 11.
Repair or replace
malfunction part. Go to
Step 11.
Go to Step 6.
Go to Step 9.
Go to Step 9.
Go to Step 11.
Go to Step 11.
Repair or replace
malfunction part(s). Go
to Step 11.
S6JB0A3314001
No
Perform customer
complaint analysis.
Go to Step 4.
Go to Step 5.
Go to Step 8.
Go to Step 7.
Go to Step 8.
Go to Step 10.
Check and repair
malfunction part(s). Go
to Step 11.
Check and repair
malfunction part(s). Go
to Step 11.
Go to Step 11.