Dtc Clearance - Suzuki Grand Vitara 2011 Manual

5) After completing above check, turn ignition switch to
"OFF" position.
NOTE
HVAC control module returns to a original
state at the following conditions.
• Ignition switch turned to "OFF" position
• Temperature selector is operated
• Blower speed selector is operated
• 5 minutes have passed since HVAC control
unit started DTC display

DTC Clearance

Using SUZUKI Scan Tool
1) Turn ignition switch to OFF position.
2) Connect SUZUKI scan tool to data link connector
(DLC) (1).
Special tool
(A): SUZUKI scan tool
(A)
3) Turn ignition switch to ON position.
4) Erase DTC according to instructions displayed on
SUZUKI scan tool. Refer to SUZUKI scan tool
operator's manual for further details.
5) After completing the clearance, turn ignition switch to
OFF position and disconnect SUZUKI scan tool from
DLC.
6) Perform "DTC Check" and confirm if normal DTC
(NO CODES) is displayed.
Not Using SUZUKI Scan Tool
S6JB0A7204003
1
I5JB0A720014-01
Air Conditioning System:
1) Display history DTC by HVAC control module
referring to "Not Using SUZUKI Scan Tool" under
"DTC Check".
2) Confirm display DTC and light "DEF" indicator lamp
(1).
3) Push "DEF" switch (2) at 5 seconds or more.
1
4) After completing the clearance, turn ignition switch
OFF position.
5) Perform "DTC Check", and confirm if normal DTC is
displayed and if any other DTC is detected.
7B-18
2
I5JB0A720016-03