Front Seat Belt Inspection - Suzuki Grand Vitara 2011 Manual

Hide thumbs Also See for Grand Vitara 2011:
Table of Contents

Advertisement

4) Disconnect Yellow connector (1) from seat belt
pretensioner (2).
a) Release locking of lock button (3).
b) After unlocked, disconnect connector.
5) Remove front seat belts from the vehicle.
Installation
Install in reverse order of removal, noting the following.
• Seat belt anchor bolts should have an unified fine
thread (7/16-20 UNF). Under no circumstances
should any different sized or metric screw threads be
used.
• Connect Yellow connector (1) to seat belt
pretensioner securely.
a. Connect connector.
b. Lock connector with lock button (2).
• Enable air bag system. Refer to "Enabling Air Bag
System in Section 8B".
2
3
a
b
1
I5JB0A810003-01
2
3
b
a
1
I5JB0A810004-01

Front Seat Belt Inspection

WARNING
!
• Never attempt to disassemble or repair the
seat belt pretensioner (retractor
assembly). If any abnormality is found, be
sure to replace it with new one as an
assembly.
• Be sure to read "Precautions on Service
and Diagnosis of Seat Belt", before
starting to work and observe every
precaution during work. Neglecting them
may result in personal injury or
unactivation of the seat belt pretensioner
when necessary.
• Never measure resistance of pretensioner
or disassemble it. Otherwise, personal
injury may result.
CAUTION
!
If seat belt pretensioner (retractor assembly)
was dropped from a height of 30 cm (1 ft) or
more, it should be replaced.
Seat belts and attaching parts can affect the vital
components and systems of a vehicle.
Therefore, they should be inspected carefully and
replaced with genuine parts only.
Seat Belt
• The seat belt webbing or strap should be free from
damage.
Retractor Assembly (with Seat Belt Pretensioner)
1) Let the seat belt retract fully to confirm its easy
retraction.
• The retractor assembly should lock webbing when
pulled quickly.
• The front seat belt retractor assembly (1) should
pass the inspection and should lock webbing even
when tilted (approx. 15°) toward the fore and aft or
right and left directions.
Seat Belts:
8A-4
S6JB0A8106003
I5JB0A810005-02

Advertisement

Table of Contents
loading

Table of Contents