7A-18 Heater and Ventilation:
5) Remove side ventilation louver (1) from instrument
panel while pressing claws (2).
2
2
Installation
1) Reverse removal procedure, noting the following.
• Install side ventilation louver (1) to instrument
panel (2) as shown in figure.
2
1
• When installing defroster duct to instrument panel,
put claws of defroster duct into hole of ventilator
duct surely.
Rear Duct Components
1
1. Rear duct
Rear Duct Removal and Installation
Removal
2
1) Disconnect negative (–) cable at battery.
2) Remove front seats.
3) Remove console box.
4) Take off carpet till rear ducts is totally exposed.
5) Remove rear ducts (1).
1
2
I5JB0A710023-01
Installation
Reverse removal procedure noting the following.
• Insert boss (1) of duct into hole of floor member (2).
1
2
I5JB0A710024-02
S6JB0A7106022
I5JB0A710025-02
1
1
S6JB0A7106023
I5JB0A710026-01
2
I5JB0A710027-01