Repair Instructions; Front Seat Belt Components; Front Seat Belt Removal And Installation - Suzuki Grand Vitara 2011 Manual

8A-3 Seat Belts:

Front Seat Belt Components

WARNING
!
• Never attempt to disassemble or repair the seat belt pretensioner (retractor assembly). If any
abnormality is found, be sure to replace it with new one as an assembly.
• Be sure to read "Precautions on Service and Diagnosis of Seat Belt" before starting to work and
observe every precaution during work. Neglecting them may result in personal injury or
unactivation of the seat belt pretensioner when necessary.
6
(b)
3
7
(a)
2
(a)
5
a) b)
1. Upper anchor
2. Lower anchor
3. Retractor assembly

Front Seat Belt Removal and Installation

WARNING
!
• Never attempt to disassemble or repair the
seat belt pretensioner (retractor
assembly). If any abnormality is found, be
sure to replace it with new one as an
assembly.
• Be sure to read "Precautions on Service
and Diagnosis of Seat Belt" before starting
to work and observe every precaution
during work. Neglecting them may result in
personal injury or unactivation of the seat
belt pretensioner when necessary.

Repair Instructions

1
4. Buckle
5. Yellow connector (for seat belt pretensioner)
6. Retractor assembly upper mounting bolt
: After tightening lower bolt, tighten upper bolt.
S6JB0A8106002
4
(a)
7. Retractor assembly lower mounting bolt
: After tightening lower bolt, tighten upper bolt.
: 35 N⋅m (3.5 kgf-m, 25.5 lb-ft)
: 5.5 N⋅m (0.55 kgf-m, 4.0 lb-ft)
Removal
1) Disconnect negative (–) cable at battery.
2) Disable air bag system. Refer to "Disabling Air Bag
System in Section 8B".
3) Remove center pillar lower trim.
S6JB0A8106001
(a)
I5JB0A810002-01