Suzuki Grand Vitara 2011 Manual page 1722

8B-91 Air Bag System:
Step
2 1) With ignition switch OFF, disconnect SDM connector
"L32".
2) Release shorting bar in SDM connector inserting release
tool (1) included in special tool (A).
3) Measure resistance between "L32-1" and body ground,
and between "L32-2" and body ground (for DTC B1333)
or "L32-3" and body ground, and between "L32-4" and
body ground (for DTC B1337) with connected special
tools (A), (B) and (C).
Special tool
(A): 09932–76010
(B): 09932–75010
(C): 09932–78310
"L32-1"
"L32-2" "L32-3" "L32-4"
Is resistance infinity?
NOTE
Upon completion of inspection and repair work, perform the following items.
• Reconnect all air bag system components, ensure all components are properly mounted.
• Clear DTCs referring to "DTC Clearance", if any.
• Repeat "Air Bag Diagnostic System Check" to confirm that the trouble has been corrected.
Action
(A)
1, (A)
"G18", "G41"
(A)
STEERING WHEEL
Yes
Substitute a known-
good SDM and recheck.
(C)
(B)
I5JB0A820059-01
No
DTC B1333: Repair
short from "YEL/GRN"
or "YEL/BLU" wire
circuit to ground.
DTC B1337: Repair
short from "BLK/YEL" or
"BRN/YEL" wire circuit
to ground.