J20 Engine Model - Suzuki Grand Vitara 2011 Manual

5) Tighten new armature plate bolt (1) as specified
torque.
Tightening torque
Armature plate bolt (a): 15 N·m (1.5 kgf-m, 11.0
lb-ft)
Special tool
(A): 09991–06310
1
2
2. Armature plate
Magnet Clutch Removal and Installation for J20
Engine Model
Removal
1) Remove compressor from vehicle referring to
"Compressor Assembly Removal and Installation for

J20 Engine Model".

2) Fix armature plate (1) with special tool (A) and
remove armature plate bolt.
Special tool
(A): 09991–06310
NOTE
Do not reuse armature plate bolt.
1
(A)
I5JB0A720070-02
S6JB0A7206041
2
(A)
I5JB0A720071-01
Air Conditioning System:
3) Remove armature plate.
4) Remove shim(s) from shaft.
5) Using special tool (A), remove snap ring (1).
Special tool
(A): 09900–06107
(A)
6) Remove magnet clutch pulley (1) with puller (2).
NOTE
Be careful not to damage pulley.
7) Remove snap ring (1) using special tool (B), and
then remove magnet clutch coil (1).
Special tool
(A): 09900–06107
7B-90
1
I5JB0A720072-01
1
2
I5JB0A720073-01
(A)
1
I5JB0A720074-02