Suzuki Grand Vitara 2011 Manual page 1428

5B-59 Manual Transmission/Transaxle: For Diesel Engine Model
22) Clean mating surfaces of both rear case (1) and
adapter case (2), and uniformly apply sealant to rear
case as shown in figure by such amount that its
section is 1.5 mm (0.059 in.) in diameter, and then
mate it with adapter case.
"A": Sealant 99000–31110 (SUZUKI Bond
No.1215)
23) Install rear case to adapter case. Tighten adapter
case No.1 bolts (3) and new adapter case No.2 bolt
(4) to specified torque.
Tightening torque
Adapter case No.1 bolt (a): 45 N·m (4.5 kgf-m,
32.5 lb-ft)
Adapter case No.2 bolt (b): 54 N·m (5.4 kgf-m,
39.0 lb-ft)
2
"A"
1
2
1
3, (a)
3, (a)
4, (b)
I5JB0B520049-02
24) Clean mating surfaces of both reverse idle gear case
(1) and rear case (2), and uniformly apply sealant to
reverse idle gear case as shown in figure by such
amount that its section is 1.5 mm (0.059 in.) in
diameter, and then mate it with rear case.
"A": Sealant 99000–31110 (SUZUKI Bond
No.1215)
25) Install reverse idle gear case to rear case with new
bolts. Tighten No.1 bolts (3) and No.2 bolts (4) to
specified torque.
Tightening torque
Reverse idle gear case No.1 bolt and No.2 bolt
(a): 26 N·m (2.6 kgf-m, 19.0 lb-ft)
1
"A"
26) Apply grease to select guide pins (1), and then install
select guide pins, select return low speed spring
(short) (2) and select return 5th & reverse spring
(long) (3). Apply sealant to select return bolts, and
then tighten bolts (4) to specified torque.
"A": Grease 99000–25010 (SUZUKI Super
Grease A)
"B": Sealant 99000–31110 (SUZUKI Bond
No.1215)
Tightening torque
Select return bolt (a): 25 N·m (2.5 kgf-m, 18.0 lb-
ft)
4, "B", (a)
3
1, "A"
3, (a)
2
3, (a)
1
4, (a)
I5JB0B520050-01
2
4, "B", (a)
1, "A"
I5JB0B520051-01