Suzuki Grand Vitara 2011 Manual page 972

3B-27 Differential: Rear
d) Remove drive bevel pinion (1) with rear bearing,
shim and spacer from carrier.
If it is hard to remove, screw an used nut (2) into
drive bevel pinion and hammer (3) on that nut
with a plastic hammer but never directly on drive
bevel pinion.
1
e) Remove drive bevel pinion rear bearing (2) by
using bearing puller (3) and hydraulic press.
CAUTION
!
To avoid rear bearing from being damaged,
support it at flat side of bearing puller.
1. Drive bevel pinion
3
2
I5JB0A321018-01
I1JA01322006-01
10) Remove oil seal (1) using special tool.
Special tool
(A): 09913–50121
11) Using a hammer and brass bar (1), drive out front
bearing outer race (2).
12) Drive out rear bearing outer race (1) in the same
manner as Step 11).
(A)
1
I5JB0A321019-01
I5JB0A321020-01
I5JB0A321021-01